Available from Dot2dot at $500 (excl GST) and consists of the following components:
|
|
|
|
|
|
|
|
quantity
|
|
Inline pump 12 volt 14 watt
|
|
|
|
|
1
|
|
Nozzles (one of each type)
|
|
17
|
|
Dot2dot porous hose (metres)
|
|
|
|
5
|
|
Flow splitter with inlet valve
|
|
|
|
|
1
|
|
Birdbath controller
|
|
|
1
|
|
Pump controller with level sensor
|
|
|
1
|
|
Filter – 120 mesh
|
|
|
1
|
|
Pressure monitor tubes
|
|
|
4
|
|
Electric cable 3-strand (metres)
|
|
|
10
|
For the wall mounted flow splitter, the wall mount is included.
For the star picket mounted flow splitter, the star pickets are not included.
The following are not included: pipe and pipe fittings, 12 volt power supply.
The pump controller is connected to the level sensor with probes to detect the water level in the birdbath controller. When the water level falls below the low probe the pump starts automatically and the irrigation interval commences. When the water level reaches the high probe, the pump stops automatically and so does the irrigation. The cycle continues indefinitely.
The pump can deliver up to 450 L/h to the flow splitter. This can be increased to 800 L/h by using two 14 watt pumps.
Solar powered measured irrigation is also referred to as Dot2dot Solar Irrigation. Each pump requires a 20 watt solar panel available from Dot2dot at $150 (excl GST).
Dot2dot porous hose, flow-splitter nozzles and dripper nozzles are all available from Dot2dot.